Asian Teacup Coasters

Coasters are that item that you don’t think you need until you actually need them. This simple craft project produces a petit version of regular sized coasters to suit Japanese, Chinese, and Korean style teacups with a narrower base. Natural-looking yet finished, these artistic little rounds are designed to complement the beauty of any Asian-inspired tea experience.

There’s something that I love about the shiny thickness and clarity of lacquer that I wanted to re-create with this project. For me, the best medium for a pretty, glistening lacquer finish is wood. To start, I use some unfinished wooden disks that are easily found in the wood section of your local craft store.

The rounds are only a little over 2″ across and 1/4″ thick. I like that the wood rounds are sturdy and have weight to them, since many Asian-style teacups are heavier and bulkier than English-style teacups. Use whichever size rounds suit your teacups, even larger or thinner ones will work great.

The lacquer finish on these coasters is achieved by none less than 3 kinds of Mod Podge. If you are wondering–no, I’m not being sponsored by Mod Podge for this post. I just love the stuff! The most unique of the 3 “Podges” is Dimensional Magic (the yellow one). Dimensional Magic creates a clear yet slightly puffy surface that is water tight, which helps to protect and preserve the beauty of the chiyogami paper used here. With this special resin, a quick rinse or wipe with water won’t be problem for these coasters.

I used a set of origami paper that came in riffs of gold and black to help this coaster set look cohesive without looking boring. Feel free to use whichever decorative papers look good to you, but try to pick a paper with good-quality texture and a pretty print that won’t warp after you apply glue to it. Chiyogami’s fibrous composition makes it malleable and soft, especially after it comes in contact with glue, which means that it adheres to wood like fabric would.

The longest and hardest part of making these coasters is waiting for them to dry. Although the Dimensional Magic glue states to wait just 3 hours, it’s really a good idea to wait a full 24 hours before putting these coasters to use. The thick layer of glossy resin will dry hard, clear, and ultra-sturdy this way, making it ready to withstand the weightiest cup of fragrant Asian tea.

Asian Teacup Coasters

What You’ll Need:

wood rounds

spice jar lid or other hard round with a diameter 1/8″ less (slightly less) than the wood rounds

origami/chiyogami paper

X-Acto Knife

glue sponge or brush

glue for paper (I used Mod Podge for Paper)

clear acrylic sealer ( I used Mod Podge Super Hi-Shine)

Mod Podge Dimensional Magic (do not shake before using)

pieces of paper or cardboard to use as a work surface


1.)  Use X-Acto Knife to cut a round of origami paper that is 1/8″ less than the diameter of the wood round. Find a perfectly round and hard object to do this (I used the top of a spice jar). You can use a camera lens cover or the lip of a small bowl/ glass to do this. You can also use a round circle paper punch if you can find the right size. Cut the circles out over a covered, cut-friendly work surface. Please take extra pre-cautions and care when using an X-Acto Knife…they are so incredibly sharp!!
2.)  Use a sponge brush to lightly apply an even layer of paper glue to the back of each origami paper round. Apply the glue all the way to the edges, then stick the paper round directly on top of the wood round, keeping it in the center so that there is a bit of a wood border around the paper round. Let the rounds dry for 10 minutes.

3.)  Now use the acrylic sealer spray to evenly spray over and around the sides of each coaster. I apply 3 coats, each about 5 minutes apart in a well-ventilated place. After you’ve applied the 3rd coat, let the coasters dry for 1 hour.

4.)  After 1 hour, apply the Dimensional Magic on top of the edge of the paper and gently nudge it to the end of the coaster without actually letting it drip over. With this step we are sealing the paper so that it can’t come in contact with water later.

5.)  After sealing the edge of the paper round, then gradually fill the center portion of the coaster completely and evenly with the Dimensional Magic. Take care to cover the paper completely, with no gaps or air holes in it. When it is applied, the Dimensional Magic is slightly opaque, but don’t worry–it will dry completely clear. If you notice an air bubble, use the X-Acto Knife to pierce it (then wipe off the knife carefully).

6.)  Let the coasters dry for a full 24 hours, until completely hardened and clear. If they need to be cleaned, the best way to do this is by wiping them down with a damp paper towel or washcloth. Asian Teacup Coasters are a great entertaining accent and also make a unique little gift or party favor.

37 thoughts on “Asian Teacup Coasters

  1. Bonnie,
    These coasters are the perfect project for ne to bring to my new job just outside of Portland, OR. As the Director of Life Enrichment, I will be overseeing the well-being of patients and residents in a small skilled nursing facility. I will have to simplify the project a bit for them, but the outcome will be very similar. Instead of shellac or lacquer, I’ll use clear nail polish.

    It’s non breakable, easy to manage, non toxic, and the results will be lovely. I see them making them as holiday gifts for their caregivers.

    Thank you so much. Hope all is well.


  2. Wow your coasters look stunning! I especially love the japanese wave pattern. Thanks for the idea, definitely have to do more crafts and so I can also use up my origami paper 🙂

  3. these are so adorable! i have a similar project in mind to do that has been on my pinterest board forever. there just never seems to be any time. these would make such great gifts for the holidays or a housewarming.

    • Thank you Lan! I was deciding between using this origami paper and some Thai marbled paper for this project. If I did the Thai one, the coasters would have paired great with your Thai tea post! Hope all is well…Happy Friday. 🙂

  4. Pingback: Sélection DIY pour fêter les (mes) vacances ! |

  5. love seeing you …drop by never know what we will be serving up…
    YOU Matter!
    Mdm Samm

    * you are a no reply blogger Bonnie…so I could not answer you ….leave an email next time and I will add you to the list for giveaways too

  6. Pingback: PLUS . . . Recipes, Jokes, Art, Design & Memories! | Mark Lipinski's Blog

  7. Pingback: Asian inspired Dimensional Magic coasters - Mod Podge Rocks

  8. Beautiful project! I’m worried about the dimensional magic making them too puffy and therefore making the teacup not rest on them evenly. How much do you put on and how do you keep it from being raised too far up off the coaster (if that makes sense)?

    • Hi Mandy, I totally understand your question. So one thing to keep in mind is that the dimensional magic looses volume as it dries (like any other glue does). I wouldn’t worry about them being uneven…as long as you are relatively careful about applying it, the dimensional magic tends to even out itself. Another technique to try is to apply the glue in a circular spiral fashion, from the outside in towards the center, once you’ve already sealed/glued down the edges of the origami paper. After applying the glue in an even layer you can also give the coaster a quick horizontal shake, (hold the sides of the coaster with the glue side facing upwards) then gently shake it side to side. I apply a layer of glue that is slightly less than 1/4″ thick (which will dry to 1/8″). Hope this helps Mandy…let me know if you have any other questions!

  9. I’ve tried other recipe for making coaster from Mod Podge website last year (Tile, modpodge, paper,acrylic spray and polyurethane), and when finished it, even after month passed by, still bottom of a cup sticks to the coaster when I use it, (I even sold some without checking, feel bad). so I was wondering what was wrong, and if there is something else I should use for the coating, won’t Dimentional magic cause such a sticking problem after it gets dried on coaster ?

    • Hey there!
      Thanks for stopping by! Now that you mention it, the sticking happened to me once but thereafter I didn’t experience it again. I did brew green tea, which is brewed at a lower temperature than black tea, so perhaps that could have accounted for the difference. I’ll try to follow up on your comment further when I use the coasters again soon…hope this helps in the meantime!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s